TH series new product better than LM301H super high lumen 3030 220lm/w high cost-effictive 5 warranty years

應用 Applications

● 室內通用照明 Indoor General Lighting

● 工業照明 Industrial lighting

● 線性燈具 Professional downlights

● 替換燈和燈具 Retrofits and fixtures

1. 產品信息 Product Information

特性 Features

●PCT 塑料 PCT package

●外觀尺寸 Package Dimension:3.0mm×3.0mm×0.65mm

●發光角度 Viewing Angle:120°

●符合ROHS標準 ROHS Approved

2.產品編碼 Product Number

產品型號Model. P/N NO.:S-F3 10 THX XXXX X

3.外形尺寸 Dimensions

備注 Postscript:

·所有尺寸單位為mm ,如無特殊說明誤差范圍為±0.2mm.

·All dimensions area in mm tolerance is ±0.2mm unless otherwise noted.

4.極限參數 Absolute Maximum Ratings

說明:

·極限功率和正向電流 是指模塊溫度通過使用合適的散熱體下的最大設置數值.

·最初連接錯誤的反向電壓,超出將可能損壞模組.

·不一樣的溫度 (Tj溫度測試點)表示模塊要按照降級曲線進行對應數據操作 .

Explain:

·Max power and positive current mean the maximum setting value of the bottom temperature of led light source by using the appropriate heat sink.

·Connection error and off-limits voltage may damage LED chip.

·Different temperatures(temperature test point Tj) , said LED light should operate follow derating curve on the text

5.光電特性 Electrical-Optical Characteristics

注意:

·測試環境溫度25 ℃,若使用不同電流或不同的環境溫度測試,會引起色溫及電壓的變化.

·不同標準測試儀正常測試允許公差:電壓±0.1V ,顯指±2,色坐標±0.005.

Attention:

·Testing environment temperature25 ℃,and CCT and voltage will changed if tested in different current and environment temperature.

·Tolerance among different testing machine: Voltage:±0.1V, CRI±2, Color coordinate ±0.005.

6.色區參考圖 The reference map color area

7. 電壓分級 Voltage Grading

·PCT3030白光led測試正向電壓和分類,正向電壓檔定義如下:

·PCT3030 white led test forward voltage and classification, forward voltage file is defined as follows

備注:

·電壓分檔標準:0.2V/檔,光效分檔標準:10LM/W/檔,光效允許誤差±5%.

·色域可控制在5階麥克亞當橢圓之內.

·非色容差產品的中心點不在以上色域范圍,不做標識.

·整燈要求色容差≤3SDCM產品,可根據需要按色容差分光方式分BIN,通過交叉SMT方式達到相關要求,具體咨詢相關技術人員.

Postscript:

·Voltage sub-standard: 0.2V / file,Light Efficiency Classification:10LM/W/ file,optical efficiency allowable error ±5% .

·The gamut can be controlled within the fifth order Mcadam ellipse.

·Special CCT and the center point is not in above color gamut range, do not identify.

·The whole light fixture requirements color tolerance ≤ 3SDCM , according to the needs of color difference by way of sub-BIN, through the SMT-cross way to meet the requirements, the specific consult with the relevant technical staff.

9.可靠性試驗 Reliability Test Items And Conditions

1.測試項目和測試條件 Testing items and testing conditions

2.失效判定標準 Criteria For Judging Damage